Open Source RK-007 MIDI Commander @adafruit @johnedgarpark @retrokitsdev

The fine folks at Retrokits have created a new bit of open source gear called the RK-007 MIDI Commander:

Not your average number; This one is a little device to hack into your MIDI Setup. We made it with minimal amount of ( – cheap & easy to find – ) parts and soldering and devised a smart use of the keypad for easy and versatile use. It could be a handy tool to keep in your MIDI setup – and perhaps even be a good starting point for other firmware you find even more useful: This one you can build in Q-Style!

Using the keypad and knob, you can use it to select MIDI channels, send out Program Change, Note On/Off, Start/Stop, MIDI Panic, and more.

an earlier prototype of the RK-007

You can find the project files here, including wiring diagram, Arduino code, and 3D printed case models.

I’m looking forward to building a modified version with an ItsyBitsy or Feather!

Open Source RK-007 MIDI Commander @adafruit @johnedgarpark @retrokitsdev

The fine folks at Retrokits have created a new bit of open source gear called the RK-007 MIDI Commander:

Not your average number; This one is a little device to hack into your MIDI Setup. We made it with minimal amount of ( – cheap & easy to find – ) parts and soldering and devised a smart use of the keypad for easy and versatile use. It could be a handy tool to keep in your MIDI setup – and perhaps even be a good starting point for other firmware you find even more useful: This one you can build in Q-Style!

Using the keypad and knob, you can use it to select MIDI channels, send out Program Change, Note On/Off, Start/Stop, MIDI Panic, and more.

an earlier prototype of the RK-007

You can find the project files here, including wiring diagram, Arduino code, and 3D printed case models.

I’m looking forward to building a modified version with an ItsyBitsy or Feather!

CircuitPython Halloween Candy Bowl Alarm! via @sudomod_wermy

Sudo Wermy shared on YouTube:

CircuitPython Halloween Candy Bowl Alarm!

Check back in a day or two for parts list, wiring diagrams, code, etc. I *really* wanted to at least get the video up *on* Halloween but need a day or two to get that stuff ready.

Link to blog post
https://sudomod.com/halloween-candy-bowl-alarm-system/

Spooky Arduino Halloween Eyes
https://www.youtube.com/watch?v=uYIc1pLO6Xk

Raspberry Pi-powered Jack-o-lantern – Happy Halloween!
https://www.youtube.com/watch?v=CsS79T2Lvxc

Zelda Bracelet ( Zelda Breath of the Wild )

ZekeAsakura shared on Thingiverse:

Zelda Bracelet ( Zelda Breath of the Wild )

Zelda Bracelet ( Zelda Breath of the Wild )

size :
front ·Ø 44mm intern
back Ø 50mm intern
lenght 120mm

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!

Cheshire Pumpkin

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses!

Cheshire Pumpkin
Poly Forge
https://www.thingiverse.com/thing:2615873
CR10S Pro
Orange PLA
7hrs 50mins
X:212 Y:212 Z:101mm
.2mm layer / .4mm nozzle
0% Infill / 6.5mm retract
210C / 60C
62g
60mm/s

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!

Pumpkisaur Pokemon Planter

WallyTheBeast shared on Thingiverse:

Pumpkisaur Pokemon Planter

I modified the model to put a succulent.
all credits to the original author.

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!

Super Beario Hat – Formosan Black Bear Super Mario Mashup

gynni shared on Thingiverse:

Super Beario Hat – Formosan Black Bear Super Mario Mashup

It’s just a stupid plumber’s hat on a bear

Thanks to the original authors: amaochan and docvalentine!

The author of the black bear model does not directly allow remixes. So I’ll just drop the link here:
https://www.thingiverse.com/thing:2678861

Hints:
Print hat and plate with raft and supports.
Glue parts together after cleaning them up a bit.

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!