Monday, November 30, 2020

Layer by Layer – Design a Stand for MagTag via @ecken

In this video we’ll design a simple 3D printed stand for the Adafruit MagTaga. We’ll create user parameters to make a sketch driven design that can easily be modified. Also take a look at orientations for slicing for fast / stronger prints.

Get Adafruit MagTag
https://adafru.it/4800

MagTag Learn Guide
https://learn.adafruit.com/adafruit-magtag

Vertical Stand Fusion Share Link
https://a360.co/3l9V9d8

3D printed case and (horizontal) Stand for MagTag
https://learn.adafruit.com/magtag-3d-printed-stand-case

3D model of MagTag
https://github.com/adafruit/Adafruit_CAD_Parts/tree/master/4800%20MagTag

3D Printing Projects Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Milling Monday
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVL48weqeHiu7aw-_sPhCSA

External Raspberry Pi 4 boot support now in RasPi OS #RaspberryPi @Raspberry_Pi @jamesachambers

James Chambers announces the latest version of Raspberry Pi OS (formerly Raspbian) allows the Raspberry Pi 4 to boot from an offboard disk is available.

The new Raspberry Pi 4 bootloader has finally come out of beta and made its way into the official latest Raspbian! This has been long awaited since when the Raspberry Pi 4 was released it had no native support for booting from USB / Network but it was promised right from the start it would get it through a later update.

The magic requires a firmware update. Then an edit to the rpi-eeprom-config file to specify how you’re looking to boot.

Finally, only certain USB adapters are known to work (as there are many different chipsets, only supporting the most common ones is to be expected).

See a step by step guide in James’ blog post.

Sunday, November 29, 2020

Sea Urchin Wear Shells Like Hats So Aquarists Made Tiny Hats for Them To Wear Instead

Display

Did you know sea urchins sometimes wear sort of hats? Did you also know if you happen to 3D print a top hat, a sea urchin will wear said top hat? Well, you’re welcome.

Via My Modern Met:

There are 950 species of sea urchins living on seabeds, making them one of the most widespread and common echinoderms in our oceans. They’re often called the “porcupines of the sea” because of their long spines that deter hungry predators. However, the marine animals are also prone to covering themselves with stones, shells, rocks—and even tiny hats.

Biologist Morgan Kester recently shared this discovery on social media. She writes, “I was today years old when I learned that sea urchins naturally use shells as hats for camouflage, so some aquarists had the genius idea to make them tiny hats.” She posted photos of the dapper-looking sea urchins “wearing” 3D-printed cowboy hats, top hats, and fedoras. The sea urchins not only look stylish, but the hats also help to keep them safe. Although the exact reason for covering their “heads” is unknown, it’s been theorized that the extra weight helps prevent the sea creatures from being washed away during storms. The extra coverage is also thought to protect sea urchins from predators and UV rays.

See more!

Friday, November 27, 2020

Cheesecake Assortment? No…A Cobbler Assortment!

Our successful Cobbler400 test for attaching Pi Bonnets/PHATs is followed by a dessert…an extra big helping of Cobbler that can show off your favorite HAT like say, a Sense HAT or maybe a PiTFT to show your favorite GIFs – video.

Turkeyday Leftover Leak! Cobbler 400 our first Raspberry Pi 400 accessory!

We are STUFFED with mashed potatoes, stuffing, and cranberry sauce. So it’s a good time to sit back, chillax and test out new designs. This is the coming-soon Cobbler 400 which plugs into the back of the Pi400 and lets you use any Bonnet, PHAT, mini HAT, etc. This version is just a passthru but we want to revise it when we send out for prototype fab – maybe add some STEMMA connectors, power indicators and a button. Anything else you think we should add? – video.

StepMania on the Raspberry Pi 4 #Gaming #RaspberryPi @Raspberry_Pi @SSilver2k2

Shea Silverman writes:

For anyone that knows me, Dance Dance Revolution and StepMania were a large part of my life years ago. It’s how I lost a ton of weight.

6 years ago was my first attempt to get StepMania running on a Raspberry Pi…and it was a horrible experience.

Today I’m proud to say that StepMania runs GREAT on the Raspberry Pi 4!

Read more in the post here

Artist Yung Yemi #BuyBlackFriday #BlackOwnedFriday

E IMG 20200309 211247 720x

Support black artists this Black Friday!

Adeyemi Adegbesan, who goes by the moniker Yung Yemi, makes really gorgeous Afro-futuristic portraits. There are affordable prints and posters for sale on his site.

Adeyemi Adegbesan is a Toronto based photographic artist whose practice aims to examine the intersectionality of black identity. Reflecting on blackness through pre-colonial – colonial – present day and future timelines, across regions, religions, varying levels of income, and political lines; Adegbesan interrogates the dichotomy of the richness of black experiences with the imposed societal homogeneity of ‘Blackness’. Through his work Adegbesan pulls from these varying elements to create Afro-futuristic portraits that embody history, future, and culture all in one.

Read more.

Thursday, November 26, 2020

Adafruit Holiday Gift Guide: Raspberry Pi #AdafruitGiftGuides

Adafruit Holiday Gift Guide: Raspberry Pi

After all of your holiday baking, why not wind down with a Pi that lasts?

A mainstay in the world of makers and electronics, The Raspberry Pi® is a single-board, low-cost, high-performance computer first developed in the UK by the Raspberry Pi Foundation. Not only has it helped bring the joy of electronics and computer programming to people around the world, but it has also become a staple of the maker community. The ever-present Pi keeps evolving and improving as the Pi Foundation continues to improve on an already excellent product. There’s also the five-dollar Pi Zero – a game-changing Raspberry Pi in a much smaller package – as well as its WiFi-laced cousin, the Pi Zero W.

Read through our Raspberry Pi holiday gift guide here And if you’re looking for more gift ideas, check out Adafruit.com/Explore!

Zebra Planter #3DPrinting #3DThursday

Thing files for Zebra Planter by DrFemPop Thingiverse

DrFemPop shared this project on Thingiverse!

Show off your grass with this zebra!
I am using this for wheatgrass that my cats love to eat. I don’t care for the taste personally.
No supports required!

There are two versions of this model, one with a large hole (to fill with soil), and the other that is designed for a strip of jute; jute mats used for hydroponic gardening

I personally recommend the one with a jute mat as you are going to get much more consistent straight grass with that. I also tried the soil version, it’s much easier since you literally just throw soil and seeds together, and still looks great, but it doesn’t grow nicely organized.

Download files: https://www.thingiverse.com/thing:4609735


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Desk for Tesla Model Y / 3 Steering wheel #3DThursday #3DPrinting

Desk for Tesla Model Y 3 Steering wheel by kingjamez Thingiverse

Can’t stand to be away from your Tesla? Print this desk to make it a workstation or lunch spot. From kingjamez on Thingiverse:

This is my first run at a steering wheel desk for my Tesla Model Y. It rotates onto the bottom of the steering wheel and then is held in place because the center section of the steering wheel slightly expands.

I made this to fit within the print volume of my Prusa Mini, and it’s a bit flimsy when typing on my MacBook Air because it bounces a bit. I may add another version that is a bit wider/longer/thicker when I am able to print on a larger printer.

Stil, as is it’s strong enough to rest your hands on the laptop and type with no problems.. I’m doing it right now.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Muffin full 3D printed RC airplane #3DThursday #3DPrinting

Muffin full 3D printed RC airplane by Quadkiller Thingiverse

Fun working plane from Thingiverse:

Muffin is my own full 3D printed RC airplane.
It is tested, so if you want to print it, you can have a very stable and fast model. The only thing is that like the others 3D printed rc planes, it’s a bit heavy respect a balsa or foam plane having the same dimentions. So it requires a bit of skill during the landing, because of the more speed needed to avoid stalling ( I’m working to a film coated wing, to decrease the total weight).

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

3dprintable fire pit rgb desk lamp #3DPrinting #3DThursday

3dprintable fire pit rgb desk lamp by nkmakes Thingiverse

nkmakes shared this project on Thingiverse!


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Disposable Plastic Lock #3DThursday #3DPrinting

Disposable Plastic Lock by ChTuna Thingiverse

More of tamper prevention than actual security. Good idea from ChTuna on Thingiverse:

These are simple one-time use disposable (Tamper) locks. They are designed to show damage if they have been removed.

Version 1 is less visible for tampering as the end is sealed inside.
Version 1 also has a smooth box for a note/ID to ensure the lock has not been replaced.

Version 2 is more “secure” as you can see the tabs through the bottom any tampering will be evident where with version 1 if the tabs are broken and reinserted, they are not visible.

You can also apply a little glue in the slot to ensure a higher level of tamper resistance.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Miniature Jointed Dragon #3Dprinting #3DThursday

Miniature Jointed Dragon by GreyFluffs Thingiverse

GreyFluffs shared this project on Thingiverse!

A very small friend for you to print and assemble!

Roughly 5cm from nose to tail, this tiny dragon can be strung together with mini hair elastics, or your choice of thin elastic cord. A nice size for doll houses, hiding in Easter eggs, or keeping you company at your desk.

If you require a larger friend for easier handling and assembly, I would love to see how it turns out!

Download files: https://www.thingiverse.com/thing:4604981


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Rounded Sanding Stick #3DThursday #3DPrinting

Rounded Sanding Stick by JEDUnlimited Thingiverse

Its a simple sounding tool but it does an important job. Shared by JEDUnlimited on Thingiverse:

I like the idea of the Sanding stick by multiple artists here on thingiverse, but I noticed that none of really worked for sanding circular or rounded shapes. So I’ve created this thing, which you can use to sand the convex of any rounded object with a maximum radius of 55 millimeters.

I have also included the SolidWorks files for those who want to further customize the curve of the part.

You will need M2x16 screws and nuts for this assembly which can be found on Amazon or a local hardware store

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Kyber Cristal Container #3DPrinting #3DThursday

Kyber Cristal Container by melgrubb Thingiverse

melgrubb shared this project on Thingiverse!

Most beings who visit Savi’s Workshop usually leave with multiple crystals for their new lightsaber. Each crystal comes in a very nice container… except for the one you chose during the actual build. There’s nowhere to keep your original crystal.

Print this in a color to match your original crystal, and it will have its very own display canister.

Download files: https://www.thingiverse.com/thing:4605671


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Expo Marker Wall Holder #3DThursday #3DPrinting

Expo Marker Wall Holder by Merlinlcb Thingiverse

Keep track of all your dry erase markers with this print from Merlinlcb on Thingiverse:

a simple expo marker holder for use with my whiteboard, liked how it turned out so i thought id share, it is extremely minimal and uses the bare minimum amount of material, it is designed for use with generic pushpins, I myself used some cheap 3 dollar box of pushpins from my local Walmart

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Raspberry Pi + LED Matrix Case #3DPrinting #3DThursday

Raspberry Pi LED Matrix Case V0 1 by gorse212 Thingiverse

gorse212 shared this project on Thingiverse!

First version of a case that holds a Raspberry Pi 4 and a 64×64 adafruit LED matrix. Has slots for all the connections to the Pi and the power connector for the matrix. The lid has space and vents for a fan and a holder for a mini controller. I’ve included the Freecad file so you can edit if needed.


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

MagTag Case #3DThursday #3DPrinting

The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9″ grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power is removed!

Follow the learn guide here: https://learn.adafruit.com/magtag-3d-printed-stand-case
Download the STLs: https://www.thingiverse.com/thing:4657998
Check out the MagTag here: adafru.it/4819


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Macro Knob and Keyboard #3DThursday #3DPrinting

TrashBoat shares:

This is a remix of vmensik’s VM’s macro keyboard.

I didn’t really like the rough look on the top so the model was completely redesigned to remove the ridge around the knob so that it can be printed top down without supports.

The key holder tray was also removed in favor of mounting the keys directly into the case.

A cable strain relief, a place for a micro usb port, and a slide switch were added for more connectivity options. The slide switch was added to enable switching between macro profiles.

All of the source files are uploaded so feel free to add/remove these features or to change screw hole sizes and tolerances.

download the files on: https://www.thingiverse.com/thing:4605764


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Drill Guide #3DThursday #3DPrinting

linfredriksson shares:

Metric Drill Guide

One side of the drill guide is flat for drilling on flat surfaces and one side is v shaped for drilling in corners or on round surfaces such as small pipes or dowels.

The drill guide have eight holes for drill bits from 3mm to 10mm in diameter.
Plenty of room on the sides to write the hole sizes using a felt pen for easy identification.
There is two versions of the drill guide, one that is 20mm tall and one that is 30mm tall.

Supported drill bit sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.

download the files on: https://www.thingiverse.com/thing:4608523


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Paint Pegboard Holder #3DThursday #3DPrinting

talktocory shares:

I resized the bottle holding rings on the original Citadel Paint Pegboard Holder by @abelsm2 to fit Vallejo and Army Painter bottles. The back portion of the model, the part that affixes to the pegboard, is the same size as the original.

download the files on: https://www.thingiverse.com/thing:4605939


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Honeycomb Tool Holder #3DThursday #3DPrinting

creality3dprint shares:

A holder for pencils or small tools.

download the files on: https://www.thingiverse.com/thing:4606067/files


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Spiral moving fish #3DThursday #3DPrinting


JustinSDK shares:

You may create a moving fish with different number of bones. The only limitation is how big of your 3D printer :p

download the files on: https://www.thingiverse.com/thing:1763139/files


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Tensegrity Table #3DThursday #3DPrinting

alberto_da_meduna shares:

Tensegrity table based on the wood model shown in the youtube video called “Mind-Blowing Woodworking | Building a Tensegrity Table” by “dk builds”.

download the files on: https://www.thingiverse.com/thing:4607220


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Wednesday, November 25, 2020

Soldering tips holder #3DThursday #3DPrinting

m1x shares:

Simple soldering tips holder. Holds 40 tips.
Solidworks CAD file (sldprt) is included.

download the files on: https://www.thingiverse.com/thing:4609520


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

How to Make a Bluetooth Controlled Sims Plumbob #WearableWednesday

No surprises here, 8bitsandabyte has put up another great project on Hackster.io:

We’ll be recreating the diamond that floats above the Sim’s head, also known as a plumbob, and making it Bluetooth controlled so you can set the colour to reflect your mood!

Read more and see more on YouTube



Flora breadboard is Every Wednesday is Wearable Wednesday here at Adafruit! We’re bringing you the blinkiest, most fashionable, innovative, and useful wearables from around the web and in our own original projects featuring our wearable Arduino-compatible platform, FLORA. Be sure to post up your wearables projects in the forums or send us a link and you might be featured here on Wearable Wednesday!

Tuesday, November 24, 2020

NEW GUIDE: Visual Studio Code for the Raspberry Pi #AdafruitLearningSystem #Adafruit #CircuitPython @Adafruit @Raspberry_Pi @Microsoft

A new guide in the Adafruit Learning System today: Visual Studio Code for the Raspberry Pi

In this guide, you’ll learn how to install and use Microsoft’s Visual Studio Code on the Raspberry Pi. Visual Studio Code, often shortened to VSCode, is an integrated development environment (IDE) that has a bunch of handy features that make writing code more straightforward, such as syntax highlighting, code completion, easier refactoring, and git built-in.

See the guide now >>>

 

The Importance of Ming Smith’s Photography #ArtTuesday

ARTnews celebrates Ming Smith and how inspirational her work is.

Although Smith has been considered a touchstone for generations of Black photographers, it took a while for her to become a mainstay in the art world’s biggest institutions. Over the past few years, her expressive pictures have been featured in two key surveys—“We Wanted a Revolution,” focused on Black women artists during the 1970s at the Brooklyn Museum in 2018, and “Soul of a Nation,” a traveling show about art and the Black Power movement that originated the year before at Tate Modern in London. Jafa also included her work in a show that made the rounds in European museums, and this week, some of her pictures will go on show at the Whitney Museum in an exhibition about the Kamoinge Workshop, a key Black photography collective of which Smith was an integral part. Smith has also just been awarded one of the ultimate accolades for a photographer: an Aperture book surveying her work.

Read and see more.


Screenshot 4 2 14 11 48 AMEvery Tuesday is Art Tuesday here at Adafruit! Today we celebrate artists and makers from around the world who are designing innovative and creative works using technology, science, electronics and more. You can start your own career as an artist today with Adafruit’s conductive paints, art-related electronics kits, LEDs, wearables, 3D printers and more! Make your most imaginative designs come to life with our helpful tutorials from the Adafruit Learning System. And don’t forget to check in every Art Tuesday for more artistic inspiration here on the Adafruit Blog!

Wannarit Karin is a Master of Anatomical Drawing #ArtTuesday

5fb4f38e1055d anatomical drawing class thailand 18 5fb37e82a6e99 700

Photos of Wannarit Karin’s classes (ART of Anatomy) showcase his incredible skill. The lessons are so detailed they almost look like medical classes and blur the line of art and science.

Via deMilked:

The man has over ten years of experience in teaching arts and has been invited to be a lecturer for figure painting classes as well as organized workshops for various organizations and companies throughout those years. When not busy teaching, Wannarit works as a freelance artist, sculptor and medical illustrator, writes newspaper articles, and creates animated media – truly a master of all crafts!

See more!


Screenshot 4 2 14 11 48 AMEvery Tuesday is Art Tuesday here at Adafruit! Today we celebrate artists and makers from around the world who are designing innovative and creative works using technology, science, electronics and more. You can start your own career as an artist today with Adafruit’s conductive paints, art-related electronics kits, LEDs, wearables, 3D printers and more! Make your most imaginative designs come to life with our helpful tutorials from the Adafruit Learning System. And don’t forget to check in every Art Tuesday for more artistic inspiration here on the Adafruit Blog!

DigitalFruit- Alina Boon

DigitalFruit is an interview series from Adafruit showcasing some of our favorite digital fine artists from around the world. As we begin this new decade with its rapidly changing landscape, we must envision our path through a different lens.  Over the next few weeks we’ll feature many innovative perspectives and techniques that will inspire our maker community to construct a bold creative frontier.  The only way is forward.

1. Where are you based?

I currently live in Toronto, Canada.

2. Tell us about your background?

I am an artist and interior designer situated somewhere at the crossroads of these two fields. Whatever shape my work has taken over the years, the main driver behind it has always been the desire to create ‘experiences’, whether these experiences would be generated through the complex processes of real space/place making (architecture), or at a more abstract level, through the use of expressive visuals constrained within a 2D plane.

Growing up in Romania, I always admired my mother (who is an artist) and learned a lot from her. Thanks to her, by the age of 7, I had tried my hand at most traditional mediums, including oil on canvas. I remember spending hours learning how to draw and paint from art books I found in my mother`s library. Goya and his ‘Los Caprichos’ series, Julius Podlipny with his charcoal drawings and most of the impressionists and expressionists were some of my first ‘mentors’. Eventually, it only felt natural that I followed all necessary steps to become an artist myself: Art High School, Fine Arts University and Masters.

Being curious by nature, by the time I earned my degree in Fine Arts, my interest was already drifting away from painting towards more interactive and immersive art forms like video, installation, performance but also set design and interior design. Gradually, I transitioned from visual arts to space making and interiors became my focus for years to come so much so that I decided to move overseas to follow my passion.

After earning a second degree in Interior Architecture from Ryerson University of Toronto, I had the privilege of working with many talented designers and architects in various large scale architectural projects, ranging from private residential to condominiums, hotels, restaurants and retails. All these experiences shaped the way I see things and implicitly the way I think about art. Today, I don`t only have a set of brushes and a canvas to express myself, but a whole new array of tools that I couldn`t have dreamed of 20 years ago.

With the world slowing down in the past months, I was able to dedicate most of my time to some art projects that have been seeding in my mind for quite a while. A drawing tablet opened a world of possibilities for me and Instagram seemed to be a good platform to share some of my work. So a few months ago, I started an Instagram account @alina_boon_art, which soon became my little creative hub where I display my work on a regular basis and get valuable feedback from artists and likeminded people from all over the world.

3. What inspires your work?

It is hard to point out a specific source of inspiration because it is never just one thing, but rather ‘everything’. Everything that happens to me informs my work one way or another: places, books, movies, music, dreams, random images that cross my sight every day, colors, textures, sounds, the people I meet, the conversations I have… They all have an impression on me and so the imagery I create is a distillation of these experiences, good or bad, whatever they happen to be at certain points in time. Although my work is very personal, almost like a journal, I try to place my visuals in a space that is intuitive and relatable.

4. What are you currently working on?

Most of  my current work is quite experimental from various points of view. Firstly, being new in the digital world, these works are an exploration of technical possibilities. Secondly, I am investigating visual themes that interest me right now like hybrids, paradoxes, liminal spaces and ‘non-objects’. I am drawn towards creating entities and spaces that escape clear boundaries and serve as support for introspection. They are primarily a reflection of the way I personally see and understand the world but in the process of sharing these images I discovered that together, they create a world of their own, where other people find some sort of meaning, this ‘in-between’ space where conversations are born.

Aside from my design projects and collaborations with other architects and designers, I am developing a Limited Edition Print Series with some of the artwork I have been sharing on my Instagram gallery. I am running print tests on various types of surfaces and trying to find the most appropriate physical support for my digital work.

5. Describe your process and what tools you like to use.

My work is a mix of analogue and digital painting. Coming from a traditional art background, I am quite selective with the digital tools I choose for each project and try to stay within certain boundaries that I establish beforehand.

My first encounters with digital painting were attempts to imitate traditional techniques with which I was familiar. However, the more I discover new tools, the more the idea of imitating ‘real painting’ becomes less relevant. I still use the virtual canvas in a similar way I would use a physical canvas, with the bonus of being able to use unlimited layers and undo’s. It is important for me to maintain a balance between ‘happy accidents’ and controlled composition the same way I would do when using real colors and gestural painting.

The process itself is always different for each project. Whether I get my hands dirty with charcoal and paints or keep them clean while working with a stylus pen, what matters to me is the process itself, the journey from a few abstract gestures to the final image that is relevant to me and hopefully to others. Generally, I like to keep things simple and focus on the composition itself so, most of my works are drawn with a maximum of two or three tools.

Sometimes I start from my own drawings or paintings on paper or canvas. I then take them into the digital space and morph them into something else using layers and adding digital painting. But for me personally, using an ‘input’ image takes away the joy of creating something from scratch so the preferred method remains drawing everything directly on my tablet’s ‘white canvas’. I have been using Infinite Painter a lot lately since I find this app to be the closest experience to doing analogue drawing or painting that I found so far.

6. What does your workplace or studio look like? Do you work in silence or listen to music while you work?

I have a dedicated space at home, but depending on the technique I use, I may take over other areas of the house.  Some days I work at my desktop station and use a drawing tablet. Other times I use my tablet from the comfort of my lounge chair or living room sofa and when I miss ‘the real thing’, I spread my papers, color tubes, inks and pencils all over the place. That can be quite messy and not ideal for my ‘better half’ and my cat.

I always listen to music when I work, it helps me get into a certain mood and stay focused.

7. How has technology shaped your creative vision?

It is hard to think of something that I do today that doesn’t involve the use of technology:

for my interior design projects, presentations, reels and marketing material I use an array of dedicated software depending on the project requirements or the specific phase in the design process: AutoCAD, 3DStudio MAX, Revit, Sketchup, Rhino, Lumion, Photoshop, Illustrator, Indesign, Adobe Premiere. When it comes to painting, an Android tablet that runs Infinite Painter is my best friend. I also use my desktop computer and sometimes my TV screen to visualize my work on a large format.

Although it is hard to imagine how I could do without all these tools, I try not to let technology define my work and strive to preserve the imprint of ‘human touch’ in everything I do, but that is just a personal choice.

8. Any tips for someone interested in getting started in the digital art form?

I am not an expert in any of the tools I use and it feels presumptuous to offer advice to my peers who may be more tech-savvy than I am. For someone who is just starting, I would say try as many tools as you can, experiment with various visual languages and ultimately pick whatever works best for you. I am sure you will have fun in the process and that is what is most important!

9. Where do you see generative and digital art heading in the future?

Twenty years ago I couldn’t have imagined I would be able to create large scale paintings without making a total mess and without having a generous space to store my canvases and art supplies. For many years, not having a studio has been a deterrent for me to do what I loved most. Now I can create from the comfort of my home or from anywhere else for that matter.

As technology is advancing at an increasingly faster pace, it is hard to say what will happen in the future but I am sure digital tools will become more accessible and will further transform and diversify the art scene.

Alina Boon

Links:

Website: https://www.boondesign.ca/

Instagram: https://www.instagram.com/alina_boon_art/?hl=en

 

DigitalFruit is curated by Adafruit lead photographer- Andrew Tingle

https://www.instagram.com/andrew_tingle

https://www.andrewtingle.com