Wednesday, September 21, 2022

Vertical Axis Wind Turbine #3DThursday #3DPrinting

Stuart800 shares:

Thanks to vladua for the great wind turbine. https://ift.tt/VlvY4hD
I wanted to have the bearing completely below the wind turbine. To do this, I enlarged the bars at the top and bottom and added 8 mm holes. I added a thin layer to the upper hole for better bridging. Since the wind turbine has a small base, I added supports and adhesive discs. For printing, the wind turbine should be turned in such a way that the first layer of the upper end plate bridges briefly. NabeHalter22 fits a 22mm rod, hub fits a 25mm rod or external 40mm clamps. If necessary, the axis can be fixed with M3 screws and nuts using the adjusting ring. I recommend a test print sunk in Z for the hub. Then measure the inner diameter (22.0 mm) and compensate for the possible deviation with a horizontal hole extension (Cura). Hub holder was printed with PETG and the rest with PLA.
An axle 8×310 mm and two ball bearings 608ZZ 8x22x7 mm are required, for the holder 4x cylinder head screws M5x35 with nuts.
If you want, you can glue “Savonius3KlLi” together and attach it to the protruding axle.

download the files on: https://www.thingiverse.com/thing:5429651



649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

3D Hangout Show Playlist:

Layer by Layer CAD Tutorials Playlist:

Timelapse Tuesday Playlist:

Connect with Noe and Pedro on Social Media:

Noe’s Twitter / Instagram: http://instagram.com/ecken

Pedro’s Twitter / Instagram: http://instagram.com/videopixil

No comments:

Post a Comment