Tool storage from red96lt1 on Thingiverse:
Hammer holder for pegboard. I got tired of the normal hammer holders and not having direct access to a hammer (when you stack them) so I came up with this. I made it modular sp print as many as you have hammers for. I designed it to not require support. Print the triangle face down. I tried to make the screws where they would self tap. It works, but it will melt the PLA due to friction. So I ended up taking a tap and tapping the pegboard itself. I also tried putting some gun oil on the screw and then letting it self tap. That actually worked fairly well if you don’t have access to a M8 x 1.25 tap. May try making the screws out of PETG or ABS. Of course you can always use a traditional screw, but you will likely have to cut it down. 5/16in bolt will work nicely. I just like how it looks with a flush mounted printed screw.
Download the files and learn more
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
No comments:
Post a Comment