New Guide! 3D Printed Frames for LED Glasses
3D print a frame for Adafruit LED Glasses IS31FL3741. Use any Adafruit Feather compatible board to control the LED Glasses. The Feather is secured to the arm with M2.5 x 6mm screws and hex nuts. The two arms are secured to the frame with M2.5 x 14mm long machine screws and hex nuts. The frame is secured to the LED glasses PCB with M3 x 6mm long screws and hex nuts. The Feather connects to the LED glasses using a 50mm STEMMA QT cable.
Learn Guide
https://learn.adafruit.com/3d-printed-frame-for-led-glasses-is31fl3741
Adafruit LED Glasses IS31FL3741
https://www.adafruit.com/product/5210
50mm STEMMA QT Cable
https://www.adafruit.com/product/4399
Feather RP2040
https://www.adafruit.com/product/4884
M3 Hardware Kit
https://www.adafruit.com/product/4685
M2.5 Hardware Kit
https://www.adafruit.com/product/3299
USB-C cable
https://www.adafruit.com/product/4696
No comments:
Post a Comment